Personalization
Personalization is done using a digital process which thermally imprints the submitted text onto an all-weather 3M Scotchcal clear vinyl film. The film is then permanently bonded to the bottle opener’s steel surface, and is resistant to wear, water, temperature and light. This method allows for greater detail, more customization options and better economy than many other personalization processes.
Bottle Opener Details
- Dimensions
- Capcatcher: 3.125 x 10 x 2 inches (width, length, depth); 16 ounces
- Bottle Opener (head only): 3.25 x 2.75 x 1.5 inches (height, width, depth); weight 4 ounces
- Capcatcher Capacity
- Holds up to 30 bottle caps
- Wood Types
- Oak: We use North American Red Oak, finished with a hand-rubbed organic Tung oil blend. No stains are used. The grain and color vary slightly from piece to piece, ranging from blond to deep honey.
- Mahogany: We use sustainable African mahogany, stained to a rich red-brown and finished with a hand-rubbed organic Tung oil blend. The grain and color vary slightly from piece to piece, ranging from open grain to tight grain.
- Mounting Options
- Magnet Mount: The Magnetic Capcatcher features an uncommonly powerful Mega Magnet, which easily attaches to most refrigerators, or to any flat magnetic surface. Engineered to resist shear forces and sliding, the magnet holds tight when you open a bottle, but can be easily removed by pulling straight away. These are serious magnets! They really hold to the fridge when you pop a cold one! (The Magnetic Capcatcher also comes pre-drilled for optional wall-mounting. To wall-mount, simply replace the short screws currently installed with the long screws provided.)
- Adhesive Mount: For non-magnetic, non-drillable surfaces such as stainless steel refrigerators, tile and fiberglass, add our special double-sided adhesive mounting pad to your purchase.
- Pouch Types
- Clear Vinyl Pouch: We use the same heavy-gauge UV-inhibited vinyl that is commonly found on boats. It is flexible but strong and will resist fading, cracking and discoloration. The clear vinyl pouch can be cleaned with a soft, damp cloth or sponge and a mild detergent if needed.
- Leather Pouch: Our rich, oil-tanned black leather pouches are durable, flexible and spill-resistant. The leather is “struck through” so the color penetrates the entire thickness of the hide, not just the surface layer, which helps it resist scratches. The leather pouch can be wiped clean with a soft, damp cloth.
- Emptying the Capcatcher
- All Capcatcher Bottle Openers come with a Snap-Flap on the bottom of the pouch for easy emptying. The wall-mounted Capcatchers are emptied by opening this Snap-Flap; magnetic Capcatchers can simply be removed and emptied.
- Bottle Opener Types
- Plated Steel: Our standard bottle opener is cast from durable solid steel, then heavily zinc-plated for a lustrous matte-sheen.
- Stainless Steel: Our premium bottle opener is made from Type 304 (non-magnetic) unplated stainless steel, with a highly polished, mirror finish. It will never rust, even in a marine environment.
- Personalization Method
- Personalization is done using a digital process which thermally imprints the submitted text onto an all-weather 3M Scotchcal clear vinyl film. The film is then permanently bonded to the bottle opener’s steel surface, and is resistant to wear, water, temperature and light. This method allows for greater detail, more customization options and better economy than many other personalization processes.

Everything you always wanted to know about the
Capcatcher Magnet (but were afraid to ask)
The magnet on your Capcatcher is no ordinary magnet…it is a high energy Oriented Barium Ferrite Magnet that is specifically manufactured for use on your Capcatcher Bottle Opener. With it’s high “MgOe” (the measurement of magnetic energy), this is definitely not your grandmother’s old wimpy refrigerator magnet.
Capcatchers Magnets are engineered to resist shear forces or sliding, but will come off the metal surface relatively easily if pulled straight away. The Proof is in the Pudding: these babies really hold to a refrigerator when you open a bottle but can be easily removed for emptying.
The strong pressure-sensitive adhesive that holds the magnet to your Capcatcher is “thermo-plastic”-we bake it on to permanently bond the magnet to the wood. However, this also means that mounting your Capcatcher to a hot surface such as a stove or grill can weaken the bond we worked so hard to create. A Rule of Thumb: if a surface is a little too hot for your hand, it is a little too hot for your Capcatcher.
This is a serious magnet! Do not place your Capcatcher Bottle Opener within one foot of computers, magnetic recording tape, or other magnetically encoded surfaces such as credit cards. Pacemaker/defibrillator owners should not hold the Capcatcher Bottle Opener ‘close to the vest.’ Magnetic compasses in close proximity to your Capcatcher Bottle Opener may require recalibration.
It is common for people to be a little skeptical about whether or not these magnets are strong enough to actually hold when you pop a cold one. But we think that you will become a believer as soon as you try your Magnetic Capcatchers.

A "Snap Flap" at the bottom of all Capcatchers
allows for easy emptying of bottle caps!
Adhesive Mounting PadPerfect for mounting a Capcatcheron non-magnetic surfaces such as:
|
![]() |
![]() |
Bucket Details
- Dimensions
- Large Size: 7” high, 9.5” top diameter, 6.5” bottom diameter; weighs 1.35 lbs (.62 kg).
- Medium Size: 5.5” high, 7.5” top diameter, 5.25” bottom diameter; weighs 8 ounces.
- Capacity
- Large Size: Our nominal 6 qt bucket nicely holds six 12oz bottles with room for ice; its capacity to brimming is 5.56 qt (5.26 liters).
- Medium Size: Capacity to the brim is approximately 3 quarts (2.8 liters), which nicely holds three 12oz bottles with ice, a bag of snacks, a 6” potted plant, or whatever else you can think of!
- Materials
- Our buckets are made from heavy-duty, top quality galvanized steel. Each bucket has a reinforced molding band for strength, and a heavy-gauge bale with solid wooden handle.
- Personalization Method
- Personalization is done using a digital process which thermally imprints the submitted text onto an all-weather 3M Scotchcal clear vinyl film. The film is then permanently bonded to the bucket’s steel surface, and is resistant to wear, water, temperature and light. This method allows for greater detail, more customization options and better economy than many other personalization processes.
- Bucket Coaster (optional)
- The Capcatchers bucket coaster is designed to contain the condensation from your ice-cold bucket of beer. Made from 2mm neoprene, it is perfectly sized to fit our 6-quart beer bucket. Better yet, it features a non-skid, moisture barrier backing to protect your table surfaces. It is the perfect addition to an already awesome gift! Coaster diameter: 8 inches. Color: Gray.
Drinkware Details
- Dimensions
- Pub Glass: 6” high, 3.5” top diameter, 2.38” bottom diameter; weighs 15 ounces (.42 kg).
- Stainless Steel Tumbler: 5.5” high, 3.25” top diameter, 2.5” bottom diameter; weighs 5.5 ounces (156g).
- Glass Mug: 5.5” high, 3” diameter, 5” wide with handle; weighs 1.45 lbs (.66 kg).
- Capacity
- Pub Glass: Capacity to the brim is one pint: approximately 16 ounces (473ml). Plenty of room for a bottle of beer plus foam.
- Stainless Steel Tumbler: Capacity to the brim is approximately 13.5 ounces (400ml), which neatly holds a 12oz bottle of beer with room for foam.
- Glass Mug: Capacity to the brim is approximately 15 ounces (443ml). Perfectly holds a bottle of beer plus foam.
- Materials
- Pub Glass & Mug: Clear glass, nothing else. Top-shelf dishwasher safe.
- Stainless Steel Tumbler: Lightweight but sturdy, these food-grade stainless steel cups are insulated by a seamless double-wall, about 1/8" (4mm) thick. All stainless steel construction with a brushed finish - absolutely no plastic! Top-shelf dishwasher safe.
- Personalization Method
- Personalization is done using a digital process which thermally imprints the submitted text onto an all-weather 3M Scotchcal clear vinyl film. The film is then permanently bonded to the drinkware’s surface, and is resistant to wear, water, temperature and light. This method allows for greater detail, more customization options and better economy than many other personalization processes.
Gift Wrap Kit Details
The Bucket Gift Wrap Kit (included with your gift set) is a clear plastic gift bag with a metallic gold pull bow. It comes to you flat (unassembled) so you can fill the bucket with goodies, then wrap it. (Instructions are included.)

