"If those men would only use
Capcatcher
Bottle Openers
at these picnics!!!"

Magnetic Capcatcher Bottle Openers
(built for power and they’re screw-mountable, too!)

Yes, the magnetic Capcatcher Bottle Openers really do work! We use an uncommonly powerful “Oriented High Energy” magnet on the back to hold FAST to a refrigerator or to other similar surfaces. These "monster magnets" are specially engineered to resist s-l-i-d-i-n-g, but release quickly when pulled straight away from the surface.

These Mega Magnets hold your Capcatcher to the fridge like it's bolted there!

All magnetic Capcatcher Bottle Openers are pre-drilled so they can be screw-mounted to walls, cabinets, decks, etc. (screws included). Use the Snap Flap at the bottom of the pouch for emptying caps when the opener is screw-mounted. Great for RV’s, boats, campers, decks, porches...wherever bottles are opened!

Your magnetic Capcatcher Bottle Opener is handcrafted using select Northern hardwoods. Approximately 3” wide and 10” high; the vinyl or leather pouches hold between 4 and 5 six-packs of caps.

Screw-Mounted Capcatcher Bottle Openers

These babies do not have a magnetized backing and are designed for screw-mounting to cabinets, doors, decks, walls, bars, etc.

The screw-mounted Capcatcher Bottle Openers are narrower than their magnetic cousins to enable them to fit between cupboard doors or on a door molding (two popular places in kitchens).

Like the magnetized version, the screw-mounted Capcatcher Bottle Openers are also handcrafted from quality Northern hardwoods and are approximately 2 5/8” wide by 10” high. They are available with either a vinyl or leather pouch, and all come with a Snap Flap on the bottom for easy emptying.

Pouch Info

VINYL: Our vinyl pouch is made from soft, flexible, heavy gauge vinyl. It is clear, washable, and highly resistant to UV light and cracking. There is a vinyl Snap Flap on the bottom for easy emptying. Vinyl pouches hold between 4 and 5 six-packs worth of caps and can be used indoors or out.

LEATHER: Our leather pouch is handcrafted from rich brown, oil tanned leather. There is a leather Snap Flap on the bottom for easy emptying of caps. The Capcatcher Bottle Openers with a leather pouch are recommended for indoor use only.

Please Note: As natural materials, wood grains and leather tones will vary.

Personalization Products and Policies

PROCESS METHODS AND MATERIAL: We will personalize your items using a digital process which thermally imprints onto an all weather 3-M Scotch vinyl film. This material is permanently bonded to your item. This same process is used for outdoor signage, vehicle signs, etc. It is resistant to wear, water and abrasion. They are top-shelf dishwasher safe.

PERSONALIZATION POLICIES: Personalized items will usually ship within 7-10 business days. You will be advised in the event that any items will take longer. We suggest you order like items at the same time. We cannot guarantee personalized items will be identical on separate orders due to slight changes in font size and positioning. Sorry, but we cannot accept returns on personalized items unless we have made an error. Refunds cannot be given for personalized items returned without authorization.

The New Capcatcher Gift Box

A cool little box that is perfectly-sized to fit your Capcatcher Bottle Opener. Complete with a double layer of "stellar” wrapping tissue - - the inside sheet is bronze colored and the outer one bronze stars on a white background. For an extra buck or so, it adds a very nice finishing touch to the Capcatcher Bottle Openers that you buy as gifts. (Available for The Beer Drinker size only.)

Holes In Your Magnets?

You know that all magnetized Capcatcher Bottle Openers are also pre-drilled so they can be screw mounted as well. But until recently, the lower screw hole on the back was covered by the magnet so a screw had to go through the magnet material. Now - for your beer bottle opening convenience - the magnet also has a small hole to make screw-mounting installation simpler and easier. "On the hole", we think you’ll like it better.

A Brand New "Brand" For This Brand

People who see a Capcatcher Bottle Opener at someone else's home and want to get one, can't always find out how to contact us. That's because the 'sticky-back' labels we put on each opener can fall off, get smeared, etc. But soon each Capcatcher Bottle Openers will be branded (yes, actually lightly burned) with everything you need to reach us...and these brands aren't coming off!

1-866-2 OPENER

We have added the new number, 1-866-2 OPENER for your phone calling convenience. True...there will be some voicemail for much of the time 'cause you're keeping us real busy making your openers! But at least the call's on us.